15. Response codes

(0) mosek.rescode.ok
No error occurred.
(50) mosek.rescode.wrn_open_param_file
The parameter file could not be opened.
(51) mosek.rescode.wrn_large_bound
A very large bound in absolute value has been specified.
(52) mosek.rescode.wrn_large_lo_bound
A large but finite lower bound in absolute value has been specified.
(53) mosek.rescode.wrn_large_up_bound
A large but finite upper bound in absolute value has been specified.
(57) mosek.rescode.wrn_large_cj
A numerically large value is specified for one $[[MathCmd 687]]$ .
(62) mosek.rescode.wrn_large_aij
A numerically large value is specified for one $[[MathCmd 580]]$ .
(63) mosek.rescode.wrn_zero_aij
One or more zero elements are specified in A.
(65) mosek.rescode.wrn_name_max_len
A name is longer than the buffer that is supposed to hold it.
(66) mosek.rescode.wrn_spar_max_len
A value for a string parameter is longer than the buffer that is supposed to hold it.
(70) mosek.rescode.wrn_mps_split_rhs_vector
An RHS vector is split into several nonadjacent parts in an MPS file.
(71) mosek.rescode.wrn_mps_split_ran_vector
A RANGE vector is split into several nonadjacent parts in an MPS file.
(72) mosek.rescode.wrn_mps_split_bou_vector
A BOUNDS vector is split into several nonadjacent parts in an MPS file.
(80) mosek.rescode.wrn_lp_old_quad_format
Missing '/2' after quadratic expressions in bound or objective.
(85) mosek.rescode.wrn_lp_drop_variable
Ignored a variable because the variable was not previously defined. Usually this implies that a variable appears in the bound section but not in the objective or the constraints.
(200) mosek.rescode.wrn_nz_in_upr_tri
Non-zero elements specified in the upper triangle of a matrix were ignored.
(201) mosek.rescode.wrn_dropped_nz_qobj
One or more non-zero elements were dropped in the Q matrix in the objective.
(250) mosek.rescode.wrn_ignore_integer
Ignored integer constraints.
(251) mosek.rescode.wrn_no_global_optimizer
No global optimizer is available.
(270) mosek.rescode.wrn_mio_infeasible_final
The final mixed integer problem with all the integer variables fixed at their optimal values is infeasible.
(280) mosek.rescode.wrn_fixed_bound_values
A fixed constraint/variable has been specified using the bound keys but the numerical bounds are different. The variable is fixed at the lower bound.
(300) mosek.rescode.wrn_sol_filter
Invalid solution filter is specified.
(350) mosek.rescode.wrn_undef_sol_file_name
Undefined name occurred in a solution.
(400) mosek.rescode.wrn_too_few_basis_vars
An incomplete basis has been specified. Too few basis variables are specified.
(405) mosek.rescode.wrn_too_many_basis_vars
A basis with too many variables has been specified.
(500) mosek.rescode.wrn_license_expire
The license expires.
(501) mosek.rescode.wrn_license_server
The license server is not responding.
(502) mosek.rescode.wrn_empty_name
A variable or constraint name is empty. The output file may be invalid.
(503) mosek.rescode.wrn_using_generic_names
The file writer reverts to generic names because a name is blank.
(505) mosek.rescode.wrn_license_feature_expire
The license expires.
(700) mosek.rescode.wrn_zeros_in_sparse_data
One or more almost zero elements are specified in sparse input data.
(800) mosek.rescode.wrn_noncomplete_linear_dependency_check
The linear dependency check(s) was not completed and therefore the A matrix may contain linear dependencies.
(801) mosek.rescode.wrn_eliminator_space
The eliminator is skipped at least once due to lack of space.
(802) mosek.rescode.wrn_presolve_outofspace
The presolve is incomplete due to lack of space.
(803) mosek.rescode.wrn_presolve_bad_precision
The presolve estimates that the model is specified with insufficient precision.
(804) mosek.rescode.wrn_write_discarded_cfix
The fixed objective term could not be converted to a variable and was discarded in the output file.
(1000) mosek.rescode.err_license
Invalid license.
(1001) mosek.rescode.err_license_expired
The license has expired.
(1002) mosek.rescode.err_license_version
The license is valid for another version of MOSEK.
(1005) mosek.rescode.err_size_license
The problem is bigger than the license.
(1006) mosek.rescode.err_prob_license
The software is not licensed to solve the problem.
(1007) mosek.rescode.err_file_license
Invalid license file.
(1008) mosek.rescode.err_missing_license_file
MOSEK cannot find the license file or license server. Usually this happens if the operating system variable MOSEKLM_LICENSE_FILE is not set up appropriately. Please see the MOSEK installation manual for details.
(1010) mosek.rescode.err_size_license_con
The problem has too many constraints to be solved with the available license.
(1011) mosek.rescode.err_size_license_var
The problem has too many variables to be solved with the available license.
(1012) mosek.rescode.err_size_license_intvar
The problem contains too many integer variables to be solved with the available license.
(1013) mosek.rescode.err_optimizer_license
The optimizer required is not licensed.
(1014) mosek.rescode.err_flexlm
The FLEXlm license manager reported an error.
(1015) mosek.rescode.err_license_server
The license server is not responding.
(1016) mosek.rescode.err_license_max
Maximum number of licenses is reached.
(1017) mosek.rescode.err_license_moseklm_daemon
The MOSEKLM license manager daemon is not up and running.
(1018) mosek.rescode.err_license_feature
A requested feature is not available in the license file(s). Most likely due to an incorrect license system setup.
(1019) mosek.rescode.err_platform_not_licensed
A requested license feature is not available for the required platform.
(1020) mosek.rescode.err_license_cannot_allocate
The license system cannot allocate the memory required.
(1021) mosek.rescode.err_license_cannot_connect
MOSEK cannot connect to the license server. Most likely the license server is not up and running.
(1025) mosek.rescode.err_license_invalid_hostid
The host ID specified in the license file does not match the host ID of the computer.
(1026) mosek.rescode.err_license_server_version
The version specified in the checkout request is greater than the highest version number the daemon supports.
(1030) mosek.rescode.err_open_dl
A dynamic link library could not be opened.
(1035) mosek.rescode.err_older_dll
The dynamic link library is older than the specified version.
(1036) mosek.rescode.err_newer_dll
The dynamic link library is newer than the specified version.
(1040) mosek.rescode.err_link_file_dll
A file cannot be linked to a stream in the DLL version.
(1045) mosek.rescode.err_thread_mutex_init
Could not initialize a mutex.
(1046) mosek.rescode.err_thread_mutex_lock
Could not lock a mutex.
(1047) mosek.rescode.err_thread_mutex_unlock
Could not unlock a mutex.
(1048) mosek.rescode.err_thread_create
Could not create a thread. This error may occur if a large number of environments are created and not deleted again. In any case it is a good practice to minimize the number of environments created.
(1049) mosek.rescode.err_thread_cond_init
Could not initialize a condition.
(1050) mosek.rescode.err_unknown
Unknown error.
(1051) mosek.rescode.err_space
Out of space.
(1052) mosek.rescode.err_file_open
Error while opening a file.
(1053) mosek.rescode.err_file_read
File read error.
(1054) mosek.rescode.err_file_write
File write error.
(1055) mosek.rescode.err_data_file_ext
The data file format cannot be determined from the file name.
(1056) mosek.rescode.err_invalid_file_name
An invalid file name has been specified.
(1057) mosek.rescode.err_invalid_sol_file_name
An invalid file name has been specified.
(1058) mosek.rescode.err_invalid_mbt_file
A MOSEK binary task file is invalid.
(1059) mosek.rescode.err_end_of_file
End of file reached.
(1060) mosek.rescode.err_null_env
env is a NULL pointer.
(1061) mosek.rescode.err_null_task
task is a NULL pointer.
(1062) mosek.rescode.err_invalid_stream
An invalid stream is referenced.
(1063) mosek.rescode.err_no_init_env
env is not initialized.
(1064) mosek.rescode.err_invalid_task
The task is invalid.
(1065) mosek.rescode.err_null_pointer
An argument to a function is unexpectedly a NULL pointer.
(1070) mosek.rescode.err_null_name
An all blank name has been specified.
(1071) mosek.rescode.err_dup_name
An error occurred while reading an MPS file..
(1075) mosek.rescode.err_invalid_obj_name
An invalid objective name is specified.
(1080) mosek.rescode.err_space_leaking
MOSEK is leaking memory. This can be due to either an incorrect use of MOSEK or a bug.
(1081) mosek.rescode.err_space_no_info
No available information about the space usage.
(1090) mosek.rescode.err_read_format
The specified format cannot be read.
(1100) mosek.rescode.err_mps_file
An error occurred while reading an MPS file.
(1101) mosek.rescode.err_mps_inv_field
A field in the MPS file is invalid. Probably it is too wide.
(1102) mosek.rescode.err_mps_inv_marker
An invalid marker has been specified in the MPS file.
(1103) mosek.rescode.err_mps_null_con_name
An empty constraint name is used in an MPS file.
(1104) mosek.rescode.err_mps_null_var_name
An empty variable name is used in an MPS file.
(1105) mosek.rescode.err_mps_undef_con_name
An undefined constraint name occurred in an MPS file.
(1106) mosek.rescode.err_mps_undef_var_name
An undefined variable name occurred in an MPS file.
(1107) mosek.rescode.err_mps_inv_con_key
An invalid constraint key occurred in an MPS file.
(1108) mosek.rescode.err_mps_inv_bound_key
An invalid bound key occurred in an MPS file.
(1109) mosek.rescode.err_mps_inv_sec_name
An invalid section name occurred in an MPS file.
(1110) mosek.rescode.err_mps_no_objective
No objective is defined in an MPS file.
(1111) mosek.rescode.err_mps_splitted_var
A variable is split in an MPS data file.
(1112) mosek.rescode.err_mps_mul_con_name
A constraint name was specified multiple times in the ROWS section.
(1113) mosek.rescode.err_mps_mul_qsec
Multiple QSECTIONs are specified for a constraint in the MPS data file.
(1114) mosek.rescode.err_mps_mul_qobj
The Q term in the objective is specified multiple times in the MPS data file.
(1115) mosek.rescode.err_mps_inv_sec_order
The sections in the MPS data file are not in the correct order.
(1116) mosek.rescode.err_mps_mul_csec
Multiple CSECTIONs are given the same name.
(1117) mosek.rescode.err_mps_cone_type
Invalid cone type specified in a CSECTION.
(1118) mosek.rescode.err_mps_cone_overlap
A variable is specified to be a member of several cones.
(1119) mosek.rescode.err_mps_cone_repeat
A variable is repeated within the CSECTION.
(1122) mosek.rescode.err_mps_invalid_objsense
An invalid objective sense is specified.
(1125) mosek.rescode.err_mps_tab_in_field2
A tab char occurred in field 2.
(1126) mosek.rescode.err_mps_tab_in_field3
A tab char occurred in field 3.
(1127) mosek.rescode.err_mps_tab_in_field5
A tab char occurred in field 5.
(1128) mosek.rescode.err_mps_invalid_obj_name
An invalid objective name is specified.
(1130) mosek.rescode.err_ord_invalid_branch_dir
An invalid branch direction key is specified.
(1131) mosek.rescode.err_ord_invalid
Invalid content in branch ordering file.
(1150) mosek.rescode.err_lp_incompatible
The problem cannot be written to an LP formatted file.
(1151) mosek.rescode.err_lp_empty
The problem cannot be written to an LP formatted file.
(1152) mosek.rescode.err_lp_dup_slack_name
The name of the slack variable added to a ranged constraint already exists.
(1153) mosek.rescode.err_write_mps_invalid_name
An invalid name is created while writing an MPS file. Usually this will make the MPS file unreadable.
(1154) mosek.rescode.err_lp_invalid_var_name
A variable name is invalid when used in an LP formatted file.
(1155) mosek.rescode.err_lp_free_constraint
Free constraints cannot be written in LP file format.
(1156) mosek.rescode.err_write_opf_invalid_var_name
Empty variable names cannot be written to OPF files.
(1157) mosek.rescode.err_lp_file_format
Syntax error in an LP file.
(1158) mosek.rescode.err_write_lp_format
Problem cannot be written as an LP file.
(1160) mosek.rescode.err_lp_format
Syntax error in an LP file.
(1161) mosek.rescode.err_write_lp_non_unique_name
An auto-generated name is not unique.
(1162) mosek.rescode.err_read_lp_nonexisting_name
A variable never occurred in objective or constraints.
(1163) mosek.rescode.err_lp_write_conic_problem
The problem contains cones that cannot be written to an LP formatted file.
(1164) mosek.rescode.err_lp_write_geco_problem
The problem contains general convex terms that cannot be written to an LP formatted file.
(1165) mosek.rescode.err_name_max_len
A name is longer than the buffer that is supposed to hold it.
(1168) mosek.rescode.err_opf_format
Syntax error in an OPF file
(1170) mosek.rescode.err_invalid_name_in_sol_file
An invalid name occurred in a solution file.
(1197) mosek.rescode.err_argument_lenneq
Incorrect length of arguments.
(1198) mosek.rescode.err_argument_type
Incorrect argument type.
(1199) mosek.rescode.err_nr_arguments
Incorrect number of function arguments.
(1200) mosek.rescode.err_in_argument
A function argument is incorrect.
(1201) mosek.rescode.err_argument_dimension
A function argument is of incorrect dimension.
(1203) mosek.rescode.err_index_is_too_small
An index in an argument is too small.
(1204) mosek.rescode.err_index_is_too_large
An index in an argument is too large.
(1205) mosek.rescode.err_param_name
The parameter name is not correct.
(1206) mosek.rescode.err_param_name_dou
The parameter name is not correct for a double parameter.
(1207) mosek.rescode.err_param_name_int
The parameter name is not correct for an integer parameter.
(1208) mosek.rescode.err_param_name_str
The parameter name is not correct for a string parameter.
(1210) mosek.rescode.err_param_index
Parameter index is out of range.
(1215) mosek.rescode.err_param_is_too_large
The parameter value is too large.
(1216) mosek.rescode.err_param_is_too_small
The parameter value is too small.
(1217) mosek.rescode.err_param_value_str
The parameter value string is incorrect.
(1218) mosek.rescode.err_param_type
The parameter type is invalid.
(1219) mosek.rescode.err_inf_dou_index
A double information index is out of range for the specified type.
(1220) mosek.rescode.err_inf_int_index
An integer information index is out of range for the specified type.
(1221) mosek.rescode.err_index_arr_is_too_small
An index in an array argument is too small.
(1222) mosek.rescode.err_index_arr_is_too_large
An index in an array argument is too large.
(1230) mosek.rescode.err_inf_dou_name
A double information name is invalid.
(1231) mosek.rescode.err_inf_int_name
A integer information name is invalid.
(1232) mosek.rescode.err_inf_type
The information type is invalid.
(1235) mosek.rescode.err_index
An index is out of range.
(1236) mosek.rescode.err_whichsol
The solution defined by compwhichsol does not exists.
(1237) mosek.rescode.err_solitem
The solution item number solitem is invalid. Please note mosek.solitem.snx is invalid for the basic solution.
(1238) mosek.rescode.err_whichitem_not_allowed
whichitem is unacceptable.
(1240) mosek.rescode.err_maxnumcon
The maximum number of constraints specified is smaller than the number of constraints in the task.
(1241) mosek.rescode.err_maxnumvar
The maximum number of variables specified is smaller than the number of variables in the task.
(1242) mosek.rescode.err_maxnumanz
The maximum number of non-zeros specified for A is smaller than the number of non-zeros in the current A.
(1243) mosek.rescode.err_maxnumqnz
The maximum number of non-zeros specified for the Q matrices is smaller than the number of non-zeros in the current Q matrices.
(1250) mosek.rescode.err_numconlim
Maximum number of constraints limit is exceeded.
(1251) mosek.rescode.err_numvarlim
Maximum number of variables limit is exceeded.
(1252) mosek.rescode.err_too_small_maxnumanz
Maximum number of non-zeros allowed in A is too small.
(1253) mosek.rescode.err_inv_aptre
aptre[j] is strictly smaller than aptrb[j] for some j.
(1254) mosek.rescode.err_mul_a_element
An element in A is defined multiple times.
(1255) mosek.rescode.err_inv_bk
Invalid bound key.
(1256) mosek.rescode.err_inv_bkc
Invalid bound key is specified for a constraint.
(1257) mosek.rescode.err_inv_bkx
An invalid bound key is specified for a variable.
(1258) mosek.rescode.err_inv_var_type
An invalid variable type is specified for a variable.
(1259) mosek.rescode.err_solver_probtype
Problem type does not match the chosen optimizer.
(1260) mosek.rescode.err_objective_range
Empty objective range.
(1261) mosek.rescode.err_first
Invalid first.
(1262) mosek.rescode.err_last
Invalid last.
(1263) mosek.rescode.err_negative_surplus
Negative surplus.
(1264) mosek.rescode.err_negative_append
Cannot append a negative number.
(1265) mosek.rescode.err_undef_solution
The required solution is not defined.
(1266) mosek.rescode.err_basis
An invalid basis is specified. Either too many or too few basis variables are specified.
(1267) mosek.rescode.err_inv_skc
Invalid value in skc.
(1268) mosek.rescode.err_inv_skx
Invalid value in skx.
(1269) mosek.rescode.err_inv_sk_str
Invalid status key string encountered.
(1270) mosek.rescode.err_inv_sk
Invalid status key code.
(1271) mosek.rescode.err_inv_cone_type_str
Invalid cone type string encountered.
(1272) mosek.rescode.err_inv_cone_type
Invalid cone type code is encountered.
(1274) mosek.rescode.err_inv_skn
Invalid value in skn.
(1280) mosek.rescode.err_inv_name_item
An invalid name item code is used.
(1281) mosek.rescode.err_pro_item
An invalid problem is used.
(1283) mosek.rescode.err_invalid_format_type
Invalid format type.
(1285) mosek.rescode.err_firsti
Invalid firsti.
(1286) mosek.rescode.err_lasti
Invalid lasti.
(1287) mosek.rescode.err_firstj
Invalid firstj.
(1288) mosek.rescode.err_lastj
Invalid lastj.
(1290) mosek.rescode.err_nonlinear_equality
The model contains a nonlinear equality which defines a nonconvex set.
(1291) mosek.rescode.err_nonconvex
The optimization problem is nonconvex.
(1292) mosek.rescode.err_nonlinear_ranged
The model contains a nonlinear ranged constraint which by definition defines a nonconvex set.
(1293) mosek.rescode.err_con_q_not_psd
The quadratic constraint matrix is not positive semi-definite as expected for a constraint with finite upper bound. This results in a nonconvex problem.
(1294) mosek.rescode.err_con_q_not_nsd
The quadratic constraint matrix is not negative semi-definite as expected for a constraint with finite lower bound. This results in a nonconvex problem.
(1295) mosek.rescode.err_obj_q_not_psd
The quadratic coefficient matrix in the objective is not positive semi-definite as expected for a minimization problem.
(1296) mosek.rescode.err_obj_q_not_nsd
The quadratic coefficient matrix in the objective is not negative semi-definite as expected for a maximization problem.
(1299) mosek.rescode.err_argument_perm_array
An invalid permutation array is specified.
(1300) mosek.rescode.err_cone_index
An index of a non-existing cone has been specified.
(1301) mosek.rescode.err_cone_size
A cone with too few members is specified.
(1302) mosek.rescode.err_cone_overlap
A new cone which variables overlap with an existing cone has been specified.
(1303) mosek.rescode.err_cone_rep_var
A variable is included multiple times in the cone.
(1304) mosek.rescode.err_maxnumcone
The value specified for maxnumcone is too small.
(1305) mosek.rescode.err_cone_type
Invalid cone type specified.
(1306) mosek.rescode.err_cone_type_str
Invalid cone type specified.
(1310) mosek.rescode.err_remove_cone_variable
A variable cannot be removed because it will make a cone invalid.
(1350) mosek.rescode.err_sol_file_number
An invalid number is specified in a solution file.
(1375) mosek.rescode.err_huge_c
A huge value in absolute size is specified for one $[[MathCmd 687]]$ .
(1400) mosek.rescode.err_infinite_bound
A finite bound value is too large in absolute value.
(1401) mosek.rescode.err_inv_qobj_subi
Invalid value in qosubi.
(1402) mosek.rescode.err_inv_qobj_subj
Invalid value in qosubj.
(1403) mosek.rescode.err_inv_qobj_val
Invalid value in qoval.
(1404) mosek.rescode.err_inv_qcon_subk
Invalid value in qcsubk.
(1405) mosek.rescode.err_inv_qcon_subi
Invalid value in qcsubi.
(1406) mosek.rescode.err_inv_qcon_subj
Invalid value in qcsubj.
(1407) mosek.rescode.err_inv_qcon_val
Invalid value in qcval.
(1408) mosek.rescode.err_qcon_subi_too_small
Invalid value in qcsubi.
(1409) mosek.rescode.err_qcon_subi_too_large
Invalid value in qcsubi.
(1415) mosek.rescode.err_qobj_upper_triangle
An element in the upper triangle of $[[MathCmd 25]]$ is specified. Only elements in the lower triangle should be specified.
(1417) mosek.rescode.err_qcon_upper_triangle
An element in the upper triangle of a $[[MathCmd 26]]$ is specified. Only elements in the lower triangle should be specified.
(1430) mosek.rescode.err_user_func_ret
An user function reported an error.
(1431) mosek.rescode.err_user_func_ret_data
An user function returned invalid data.
(1432) mosek.rescode.err_user_nlo_func
The user-defined nonlinear function reported an error.
(1433) mosek.rescode.err_user_nlo_eval
The user-defined nonlinear function reported an error.
(1440) mosek.rescode.err_user_nlo_eval_hessubi
The user-defined nonlinear function reported an invalid subscript in the Hessian.
(1441) mosek.rescode.err_user_nlo_eval_hessubj
The user-defined nonlinear function reported an invalid subscript in the Hessian.
(1445) mosek.rescode.err_invalid_objective_sense
An invalid objective sense is specified.
(1446) mosek.rescode.err_undefined_objective_sense
The objective sense has not been specified before the optimization.
(1449) mosek.rescode.err_y_is_undefined
The solution item y is undefined.
(1450) mosek.rescode.err_nan_in_double_data
An invalid floating point value was used in some double data.
(1461) mosek.rescode.err_nan_in_blc
$[[MathCmd 8]]$ contains an invalid floating point value, i.e. a NaN.
(1462) mosek.rescode.err_nan_in_buc
$[[MathCmd 9]]$ contains an invalid floating point value, i.e. a NaN.
(1470) mosek.rescode.err_nan_in_c
c contains an invalid floating point value, i.e. a NaN.
(1471) mosek.rescode.err_nan_in_blx
$[[MathCmd 10]]$ contains an invalid floating point value, i.e. a NaN.
(1472) mosek.rescode.err_nan_in_bux
$[[MathCmd 11]]$ contains an invalid floating point value, i.e. a NaN.
(1500) mosek.rescode.err_inv_problem
Invalid problem type. Probably a nonconvex problem has been specified.
(1501) mosek.rescode.err_mixed_problem
The problem contains both conic and nonlinear constraints.
(1550) mosek.rescode.err_inv_optimizer
An invalid optimizer has been chosen for the problem. This means that the simplex or the conic optimizer is chosen to optimize a nonlinear problem.
(1551) mosek.rescode.err_mio_no_optimizer
No optimizer is available for the current class of integer optimization problems.
(1552) mosek.rescode.err_no_optimizer_var_type
No optimizer is available for this class of optimization problems.
(1553) mosek.rescode.err_mio_not_loaded
The mixed-integer optimizer is not loaded.
(1580) mosek.rescode.err_postsolve
An error occurred during the postsolve. Please contact MOSEK support.
(1600) mosek.rescode.err_no_basis_sol
No basic solution is defined.
(1610) mosek.rescode.err_basis_factor
The factorization of the basis is invalid.
(1615) mosek.rescode.err_basis_singular
The basis is singular and hence cannot be factored.
(1650) mosek.rescode.err_factor
An error occurred while factorizing a matrix.
(1700) mosek.rescode.err_feasrepair_cannot_relax
An optimization problem cannot be relaxed. This is the case e.g. for general nonlinear optimization problems.
(1701) mosek.rescode.err_feasrepair_solving_relaxed
The relaxed problem could not be solved to optimality. Please consult the log file for further details.
(1702) mosek.rescode.err_feasrepair_inconsistent_bound
The upper bound is less than the lower bound for a variable or a constraint. Please correct this before running the feasibility repair.
(1800) mosek.rescode.err_invalid_compression
Invalid compression type.
(1801) mosek.rescode.err_invalid_iomode
Invalid io mode.
(2000) mosek.rescode.err_no_primal_infeas_cer
A certificate of primal infeasibility is not available.
(2001) mosek.rescode.err_no_dual_infeas_cer
A certificate of infeasibility is not available.
(2500) mosek.rescode.err_no_solution_in_callback
The required solution is not available.
(2501) mosek.rescode.err_inv_marki
Invalid value in marki.
(2502) mosek.rescode.err_inv_markj
Invalid value in markj.
(2503) mosek.rescode.err_inv_numi
Invalid numi.
(2504) mosek.rescode.err_inv_numj
Invalid numj.
(2505) mosek.rescode.err_cannot_clone_nl
A task with a nonlinear function call-back cannot be cloned.
(2506) mosek.rescode.err_cannot_handle_nl
A function cannot handle a task with nonlinear function call-backs.
(2520) mosek.rescode.err_invalid_accmode
An invalid access mode is specified.
(2550) mosek.rescode.err_mbt_incompatible
The MBT file is incompatible with this platform. This results from reading a file on a 32 bit platform generated on a 64 bit platform.
(2800) mosek.rescode.err_lu_max_num_tries
Could not compute the LU factors of the matrix within the maximum number of allowed tries.
(2900) mosek.rescode.err_invalid_utf8
An invalid UTF8 string is encountered.
(2901) mosek.rescode.err_invalid_wchar
An invalid wchar string is encountered.
(2950) mosek.rescode.err_no_dual_for_itg_sol
No dual information is available for the integer solution.
(3000) mosek.rescode.err_internal
An internal error occurred. Please report this problem.
(3001) mosek.rescode.err_api_array_too_small
An input array was too short.
(3002) mosek.rescode.err_api_cb_connect
(3003) mosek.rescode.err_api_nl_data
(3004) mosek.rescode.err_api_callback
(3005) mosek.rescode.err_api_fatal_error
An internal error occurred in the API. Please report this problem.
(3050) mosek.rescode.err_sen_format
Syntax error in sensitivity analysis file.
(3051) mosek.rescode.err_sen_undef_name
An undefined name was encountered in the sensitivity analysis file.
(3052) mosek.rescode.err_sen_index_range
Index out of range in the sensitivity analysis file.
(3053) mosek.rescode.err_sen_bound_invalid_up
Analysis of upper bound requested for an index, where no upper bound exists.
(3054) mosek.rescode.err_sen_bound_invalid_lo
Analysis of lower bound requested for an index, where no lower bound exists.
(3055) mosek.rescode.err_sen_index_invalid
Invalid range given in the sensitivity file.
(3056) mosek.rescode.err_sen_invalid_regexp
Syntax error in regexp or regexp longer than 1024.
(3057) mosek.rescode.err_sen_solution_status
No optimal solution found to the original problem given for sensitivity analysis.
(3058) mosek.rescode.err_sen_numerical
Numerical difficulties encountered performing the sensitivity analysis.
(3059) mosek.rescode.err_concurrent_optimizer
An unsupported optimizer was chosen for use with the concurrent optimizer.
(3100) mosek.rescode.err_unb_step_size
A step size in an optimizer was unexpectedly unbounded. For instance, if the step-size becomes unbounded in phase 1 of the simplex algorithm then an error occurs. Normally this will happen only if the problem is badly formulated. Please contact MOSEK support if this error occurs.
(3101) mosek.rescode.err_identical_tasks
Some tasks related to this function call were identical. Unique tasks were expected.
(3200) mosek.rescode.err_invalid_branch_direction
An invalid branching direction is specified.
(3201) mosek.rescode.err_invalid_branch_priority
An invalid branching priority is specified. It should be nonnegative.
(3500) mosek.rescode.err_internal_test_failed
An internal unit test function failed.
(3600) mosek.rescode.err_xml_invalid_problem_type
The problem type is not supported by the XML format.
(3700) mosek.rescode.err_invalid_ampl_stub
Invalid AMPL stub.
(3999) mosek.rescode.err_api_internal
(4000) mosek.rescode.trm_max_iterations
The optimizer terminated at the maximum number of iterations.
(4001) mosek.rescode.trm_max_time
The optimizer terminated at the maximum amount of time.
(4002) mosek.rescode.trm_objective_range
The optimizer terminated on the bound of the objective range.
(4003) mosek.rescode.trm_mio_near_rel_gap
The mixed-integer optimizer terminated because the near optimal relative gap tolerance was satisfied.
(4004) mosek.rescode.trm_mio_near_abs_gap
The mixed-integer optimizer terminated because the near optimal absolute gap tolerance was satisfied.
(4005) mosek.rescode.trm_user_break
The optimizer terminated due to a user break.
(4006) mosek.rescode.trm_stall
The optimizer terminated due to slow progress. Normally there are three possible reasons for this: Either a bug in MOSEK, the problem is badly formulated, or, in case of nonlinear problems, the nonlinear call-back functions are incorrect.

Please contact MOSEK support if this happens.
(4007) mosek.rescode.trm_user_callback
The optimizer terminated due to the return of the user-defined call-back function.
(4008) mosek.rescode.trm_mio_num_relaxs
The mixed-integer optimizer terminated as the maximum number of relaxations was reached.
(4009) mosek.rescode.trm_mio_num_branches
The mixed-integer optimizer terminated as to the maximum number of branches was reached.
(4015) mosek.rescode.trm_num_max_num_int_solutions
The mixed-integer optimizer terminated as the maximum number of feasible solutions was reached.
(4020) mosek.rescode.trm_max_num_setbacks
The optimizer terminated as the maximum number of set-backs was reached. This indicates numerical problems and a possibly badly formulated problem.
(4025) mosek.rescode.trm_numerical_problem
The optimizer terminated due to numerical problems.
(4030) mosek.rescode.trm_internal
The optimizer terminated due to some internal reason. Please contact MOSEK support.
(4031) mosek.rescode.trm_internal_stop
The optimizer terminated for internal reasons. Please contact MOSEK support.

err_api_array_too_small

Corresponding constant:

mosek.rescode.err_api_array_too_small

Description:

An input array was too short.

Response message string:

“The input array '0' is too short in call to '1'.”
err_api_callback

Corresponding constant:

mosek.rescode.err_api_callback

Response message string:

“”
err_api_cb_connect

Corresponding constant:

mosek.rescode.err_api_cb_connect

Response message string:

“”
err_api_fatal_error

Corresponding constant:

mosek.rescode.err_api_fatal_error

Description:

An internal error occurred in the API. Please report this problem.

Response message string:

“An internal error occurred in the %s API: %s”
err_api_internal

Corresponding constant:

mosek.rescode.err_api_internal

Response message string:

“An internal fatal error occurred in an interface function”
err_api_nl_data

Corresponding constant:

mosek.rescode.err_api_nl_data

Response message string:

“”
err_argument_dimension

Corresponding constant:

mosek.rescode.err_argument_dimension

Description:

A function argument is of incorrect dimension.

Response message string:

“The argument '%s' is of incorrect dimension.”
err_argument_lenneq

Corresponding constant:

mosek.rescode.err_argument_lenneq

Description:

Incorrect length of arguments.

Response message string:

“Incorrect argument length. The arguments %s are expected to be of equal length. The length of the arguments was %s.”
err_argument_perm_array

Corresponding constant:

mosek.rescode.err_argument_perm_array

Description:

An invalid permutation array is specified.

Response message string:

“An invalid permutation array named '%s' is supplied. Position %d has the invalid value %d.”
err_argument_type

Corresponding constant:

mosek.rescode.err_argument_type

Description:

Incorrect argument type.

Response message string:

“Incorrect type in %s argument number: '%d'.”
err_basis

Corresponding constant:

mosek.rescode.err_basis

Description:

An invalid basis is specified. Either too many or too few basis variables are specified.

Response message string:

“%d number of basis variables are specified. %d are expected.”
err_basis_factor

Corresponding constant:

mosek.rescode.err_basis_factor

Description:

The factorization of the basis is invalid.

Response message string:

“The factorization of the basis is invalid.”
err_basis_singular

Corresponding constant:

mosek.rescode.err_basis_singular

Description:

The basis is singular and hence cannot be factored.

Response message string:

“The basis is singular.”
err_cannot_clone_nl

Corresponding constant:

mosek.rescode.err_cannot_clone_nl

Description:

A task with a nonlinear function call-back cannot be cloned.

Response message string:

“A task with a nonlinear function call-back cannot be cloned.”
err_cannot_handle_nl

Corresponding constant:

mosek.rescode.err_cannot_handle_nl

Description:

A function cannot handle a task with nonlinear function call-backs.

Response message string:

“A function cannot handle a task with nonlinear function call-backs.”
err_con_q_not_nsd

Corresponding constant:

mosek.rescode.err_con_q_not_nsd

Description:

The quadratic constraint matrix is not negative semi-definite as expected for a constraint with finite lower bound. This results in a nonconvex problem.

Response message string:

“The quadratic constraint matrix in constraint '%s'(%d) is not negative semi-definite as expected for a constraint with finite lower bound.”
err_con_q_not_psd

Corresponding constant:

mosek.rescode.err_con_q_not_psd

Description:

The quadratic constraint matrix is not positive semi-definite as expected for a constraint with finite upper bound. This results in a nonconvex problem.

Response message string:

“The quadratic constraint matrix in constraint '%s'(%d) is not positive semi-definite as expected for a constraint with finite upper bound.”
err_concurrent_optimizer

Corresponding constant:

mosek.rescode.err_concurrent_optimizer

Description:

An unsupported optimizer was chosen for use with the concurrent optimizer.

Response message string:

“Optimizer '%s' is unsupported in the concurrent optimizer.”
err_cone_index

Corresponding constant:

mosek.rescode.err_cone_index

Description:

An index of a non-existing cone has been specified.

Response message string:

“No cone has index '%d'.”
err_cone_overlap

Corresponding constant:

mosek.rescode.err_cone_overlap

Description:

A new cone which variables overlap with an existing cone has been specified.

Response message string:

“Variable '%s' (%d) is a member of cone '%s' (%d) and cone '%s' (%d).”
err_cone_rep_var

Corresponding constant:

mosek.rescode.err_cone_rep_var

Description:

A variable is included multiple times in the cone.

Response message string:

“Variable '%s' (%d) are included multiple times in cone '%s' (%d).”
err_cone_size

Corresponding constant:

mosek.rescode.err_cone_size

Description:

A cone with too few members is specified.

Response message string:

“A cone with too few member is specified. At least %d members are required for cones of type %s.”
err_cone_type

Corresponding constant:

mosek.rescode.err_cone_type

Description:

Invalid cone type specified.

Response message string:

“%d is an invalid cone type specified.”
err_cone_type_str

Corresponding constant:

mosek.rescode.err_cone_type_str

Description:

Invalid cone type specified.

Response message string:

“%d is an invalid cone type specified.”
err_data_file_ext

Corresponding constant:

mosek.rescode.err_data_file_ext

Description:

The data file format cannot be determined from the file name.

Response message string:

“The data file format cannot be determined from the file name '%s'”
err_dup_name

Corresponding constant:

mosek.rescode.err_dup_name

Description:

An error occurred while reading an MPS file..

Response message string:

“Name '%s' is already assigned for an item %s.”
err_end_of_file

Corresponding constant:

mosek.rescode.err_end_of_file

Description:

End of file reached.

Response message string:

“End of file reached.”
err_factor

Corresponding constant:

mosek.rescode.err_factor

Description:

An error occurred while factorizing a matrix.

Response message string:

“An error occurred while factorizing a matrix.”
err_feasrepair_cannot_relax

Corresponding constant:

mosek.rescode.err_feasrepair_cannot_relax

Description:

An optimization problem cannot be relaxed. This is the case e.g. for general nonlinear optimization problems.

Response message string:

“An optimization problem cannot be relaxed.”
err_feasrepair_inconsistent_bound

Corresponding constant:

mosek.rescode.err_feasrepair_inconsistent_bound

Description:

The upper bound is less than the lower bound for a variable or a constraint. Please correct this before running the feasibility repair.

Response message string:

“The %s '%s' with index '%d' has lower bound larger than upper bound.”
err_feasrepair_solving_relaxed

Corresponding constant:

mosek.rescode.err_feasrepair_solving_relaxed

Description:

The relaxed problem could not be solved to optimality. Please consult the log file for further details.

Response message string:

“The relaxed problem could not be solved to optimality.”
err_file_license

Corresponding constant:

mosek.rescode.err_file_license

Description:

Invalid license file.

Response message string:

“Invalid license file.”
err_file_open

Corresponding constant:

mosek.rescode.err_file_open

Description:

Error while opening a file.

Response message string:

“An error occurred while opening file '%s'.”
err_file_read

Corresponding constant:

mosek.rescode.err_file_read

Description:

File read error.

Response message string:

“An error occurred while reading file '%s'.”
err_file_write

Corresponding constant:

mosek.rescode.err_file_write

Description:

File write error.

Response message string:

“An error occurred while writing to file '%s'.”
err_first

Corresponding constant:

mosek.rescode.err_first

Description:

Invalid first.

Response message string:

“Invalid first.”
err_firsti

Corresponding constant:

mosek.rescode.err_firsti

Description:

Invalid firsti.

Response message string:

“'%d' is an invalid value for firsti.”
err_firstj

Corresponding constant:

mosek.rescode.err_firstj

Description:

Invalid firstj.

Response message string:

“'%d' is an invalid value for firstj.”
err_flexlm

Corresponding constant:

mosek.rescode.err_flexlm

Description:

The FLEXlm license manager reported an error.

Response message string:

“The FLEXlm license manager reported '%s'.”
err_huge_c

Corresponding constant:

mosek.rescode.err_huge_c

Description:

A huge value in absolute size is specified for one $[[MathCmd 687]]$ .

Response message string:

“A large value of %8.1e has been specified in cx for variable '%s' (%d).”
err_identical_tasks

Corresponding constant:

mosek.rescode.err_identical_tasks

Description:

Some tasks related to this function call were identical. Unique tasks were expected.

Response message string:

“Some tasks related to this function call were identical. Unique tasks were expected.”
err_in_argument

Corresponding constant:

mosek.rescode.err_in_argument

Description:

A function argument is incorrect.

Response message string:

“The argument '%s' is invalid.”
err_index

Corresponding constant:

mosek.rescode.err_index

Description:

An index is out of range.

Response message string:

“An index is out of range.”
err_index_arr_is_too_large

Corresponding constant:

mosek.rescode.err_index_arr_is_too_large

Description:

An index in an array argument is too large.

Response message string:

“The index value %d occurring in argument '%s[%d]' is too large(<%d).”
err_index_arr_is_too_small

Corresponding constant:

mosek.rescode.err_index_arr_is_too_small

Description:

An index in an array argument is too small.

Response message string:

“The index value %d occurring in argument '%s[%d]' is too small(>=%d).”
err_index_is_too_large

Corresponding constant:

mosek.rescode.err_index_is_too_large

Description:

An index in an argument is too large.

Response message string:

“The index value %d occurring in argument '%s' is too large.”
err_index_is_too_small

Corresponding constant:

mosek.rescode.err_index_is_too_small

Description:

An index in an argument is too small.

Response message string:

“The index value %d occurring in argument '%s' is too small.”
err_inf_dou_index

Corresponding constant:

mosek.rescode.err_inf_dou_index

Description:

A double information index is out of range for the specified type.

Response message string:

“The double information index %d is out of range.”
err_inf_dou_name

Corresponding constant:

mosek.rescode.err_inf_dou_name

Description:

A double information name is invalid.

Response message string:

“The double information name '%s' is invalid.”
err_inf_int_index

Corresponding constant:

mosek.rescode.err_inf_int_index

Description:

An integer information index is out of range for the specified type.

Response message string:

“The integer information index %d is out of range.”
err_inf_int_name

Corresponding constant:

mosek.rescode.err_inf_int_name

Description:

A integer information name is invalid.

Response message string:

“The integer information name '%s' is invalid.”
err_inf_type

Corresponding constant:

mosek.rescode.err_inf_type

Description:

The information type is invalid.

Response message string:

“The information type %d is invalid.”
err_infinite_bound

Corresponding constant:

mosek.rescode.err_infinite_bound

Description:

A finite bound value is too large in absolute value.

Response message string:

“A finite bound value is too large in absolute value.”
err_internal

Corresponding constant:

mosek.rescode.err_internal

Description:

An internal error occurred. Please report this problem.

Response message string:

“An internal error occurred '%s'.”
err_internal_test_failed

Corresponding constant:

mosek.rescode.err_internal_test_failed

Description:

An internal unit test function failed.

Response message string:

“Internal unit test function failed.”
err_inv_aptre

Corresponding constant:

mosek.rescode.err_inv_aptre

Description:

aptre[j] is strictly smaller than aptrb[j] for some j.

Response message string:

“aptre is strictly smaller than aptrb at position %d.”
err_inv_bk

Corresponding constant:

mosek.rescode.err_inv_bk

Description:

Invalid bound key.

Response message string:

“%d is an invalid bound key.”
err_inv_bkc

Corresponding constant:

mosek.rescode.err_inv_bkc

Description:

Invalid bound key is specified for a constraint.

Response message string:

“An invalid bound key for a constraint value of %d in argument '%s' has been specified.”
err_inv_bkx

Corresponding constant:

mosek.rescode.err_inv_bkx

Description:

An invalid bound key is specified for a variable.

Response message string:

“An invalid bound key for variable of value of %d in argument '%s' has been specified.”
err_inv_cone_type

Corresponding constant:

mosek.rescode.err_inv_cone_type

Description:

Invalid cone type code is encountered.

Response message string:

“'%d' is an invalid cone type code.”
err_inv_cone_type_str

Corresponding constant:

mosek.rescode.err_inv_cone_type_str

Description:

Invalid cone type string encountered.

Response message string:

“'%s' is an invalid cone type string.”
err_inv_marki

Corresponding constant:

mosek.rescode.err_inv_marki

Description:

Invalid value in marki.

Response message string:

“Invalid value in marki[%d].”
err_inv_markj

Corresponding constant:

mosek.rescode.err_inv_markj

Description:

Invalid value in markj.

Response message string:

“Invalid value in markj[%d].”
err_inv_name_item

Corresponding constant:

mosek.rescode.err_inv_name_item

Description:

An invalid name item code is used.

Response message string:

“'%d' is an invalid name item code.”
err_inv_numi

Corresponding constant:

mosek.rescode.err_inv_numi

Description:

Invalid numi.

Response message string:

“Invalid numi.”
err_inv_numj

Corresponding constant:

mosek.rescode.err_inv_numj

Description:

Invalid numj.

Response message string:

“Invalid numj.”
err_inv_optimizer

Corresponding constant:

mosek.rescode.err_inv_optimizer

Description:

An invalid optimizer has been chosen for the problem. This means that the simplex or the conic optimizer is chosen to optimize a nonlinear problem.

Response message string:

“An invalid optimizer (%d) has been chosen for the problem.”
err_inv_problem

Corresponding constant:

mosek.rescode.err_inv_problem

Description:

Invalid problem type. Probably a nonconvex problem has been specified.

Response message string:

“Invalid problem type.”
err_inv_qcon_subi

Corresponding constant:

mosek.rescode.err_inv_qcon_subi

Description:

Invalid value in qcsubi.

Response message string:

“Invalid value %d at qcsubi[%d].”
err_inv_qcon_subj

Corresponding constant:

mosek.rescode.err_inv_qcon_subj

Description:

Invalid value in qcsubj.

Response message string:

“Invalid value %d at qcsubj[%d].”
err_inv_qcon_subk

Corresponding constant:

mosek.rescode.err_inv_qcon_subk

Description:

Invalid value in qcsubk.

Response message string:

“Invalid value %d at qcsubk[%d].”
err_inv_qcon_val

Corresponding constant:

mosek.rescode.err_inv_qcon_val

Description:

Invalid value in qcval.

Response message string:

“Invalid value %e at qcval[%d].”
err_inv_qobj_subi

Corresponding constant:

mosek.rescode.err_inv_qobj_subi

Description:

Invalid value in qosubi.

Response message string:

“Invalid value %d at qosubi[%d].”
err_inv_qobj_subj

Corresponding constant:

mosek.rescode.err_inv_qobj_subj

Description:

Invalid value in qosubj.

Response message string:

“Invalid value %d at qosubj[%d].”
err_inv_qobj_val

Corresponding constant:

mosek.rescode.err_inv_qobj_val

Description:

Invalid value in qoval.

Response message string:

“Invalid value %e at qoval[%d].”
err_inv_sk

Corresponding constant:

mosek.rescode.err_inv_sk

Description:

Invalid status key code.

Response message string:

“'%d' is an invalid status key code.”
err_inv_sk_str

Corresponding constant:

mosek.rescode.err_inv_sk_str

Description:

Invalid status key string encountered.

Response message string:

“'%s' is an invalid status key string.”
err_inv_skc

Corresponding constant:

mosek.rescode.err_inv_skc

Description:

Invalid value in skc.

Response message string:

“Invalid value at skc[%d].”
err_inv_skn

Corresponding constant:

mosek.rescode.err_inv_skn

Description:

Invalid value in skn.

Response message string:

“Invalid value at skn[%d].”
err_inv_skx

Corresponding constant:

mosek.rescode.err_inv_skx

Description:

Invalid value in skx.

Response message string:

“Invalid value at skx[%d].”
err_inv_var_type

Corresponding constant:

mosek.rescode.err_inv_var_type

Description:

An invalid variable type is specified for a variable.

Response message string:

“An invalid type %d is specified for variable '%s' (%d) in argument '%s'.”
err_invalid_accmode

Corresponding constant:

mosek.rescode.err_invalid_accmode

Description:

An invalid access mode is specified.

Response message string:

“%d is an invalid access mode is specified.”
err_invalid_ampl_stub

Corresponding constant:

mosek.rescode.err_invalid_ampl_stub

Description:

Invalid AMPL stub.

Response message string:

“Invalid AMPL stub.”
err_invalid_branch_direction

Corresponding constant:

mosek.rescode.err_invalid_branch_direction

Description:

An invalid branching direction is specified.

Response message string:

“%d is an invalid branching direction.”
err_invalid_branch_priority

Corresponding constant:

mosek.rescode.err_invalid_branch_priority

Description:

An invalid branching priority is specified. It should be nonnegative.

Response message string:

“%d invalid branching priority is specified.”
err_invalid_compression

Corresponding constant:

mosek.rescode.err_invalid_compression

Description:

Invalid compression type.

Response message string:

“%d is an invalid compression type.”
err_invalid_file_name

Corresponding constant:

mosek.rescode.err_invalid_file_name

Description:

An invalid file name has been specified.

Response message string:

“'%s' is invalid file name.”
err_invalid_format_type

Corresponding constant:

mosek.rescode.err_invalid_format_type

Description:

Invalid format type.

Response message string:

“%d is an invalid format type..”
err_invalid_iomode

Corresponding constant:

mosek.rescode.err_invalid_iomode

Description:

Invalid io mode.

Response message string:

“%d is an io mode.”
err_invalid_mbt_file

Corresponding constant:

mosek.rescode.err_invalid_mbt_file

Description:

A MOSEK binary task file is invalid.

Response message string:

“The binary task file is invalid.”
err_invalid_name_in_sol_file

Corresponding constant:

mosek.rescode.err_invalid_name_in_sol_file

Description:

An invalid name occurred in a solution file.

Response message string:

“The name '%s' is an invalid name.”
err_invalid_obj_name

Corresponding constant:

mosek.rescode.err_invalid_obj_name

Description:

An invalid objective name is specified.

Response message string:

“'%s' is an invalid objective name is specified.”
err_invalid_objective_sense

Corresponding constant:

mosek.rescode.err_invalid_objective_sense

Description:

An invalid objective sense is specified.

Response message string:

“%s is an invalid objective sense code.”
err_invalid_sol_file_name

Corresponding constant:

mosek.rescode.err_invalid_sol_file_name

Description:

An invalid file name has been specified.

Response message string:

“'%s' is invalid solution file name.”
err_invalid_stream

Corresponding constant:

mosek.rescode.err_invalid_stream

Description:

An invalid stream is referenced.

Response message string:

“%d is an invalid stream.”
err_invalid_task

Corresponding constant:

mosek.rescode.err_invalid_task

Description:

The task is invalid.

Response message string:

“The task is invalid.”
err_invalid_utf8

Corresponding constant:

mosek.rescode.err_invalid_utf8

Description:

An invalid UTF8 string is encountered.

Response message string:

“An invalid UTF8 string is encountered.”
err_invalid_wchar

Corresponding constant:

mosek.rescode.err_invalid_wchar

Description:

An invalid wchar string is encountered.

Response message string:

“An invalid wchar string is encountered.”
err_last

Corresponding constant:

mosek.rescode.err_last

Description:

Invalid last.

Response message string:

“Invalid last.”
err_lasti

Corresponding constant:

mosek.rescode.err_lasti

Description:

Invalid lasti.

Response message string:

“'%d' is an invalid value for lasti.”
err_lastj

Corresponding constant:

mosek.rescode.err_lastj

Description:

Invalid lastj.

Response message string:

“'%d' is an invalid value for lastj.”
err_license

Corresponding constant:

mosek.rescode.err_license

Description:

Invalid license.

Response message string:

“Invalid license.”
err_license_cannot_allocate

Corresponding constant:

mosek.rescode.err_license_cannot_allocate

Description:

The license system cannot allocate the memory required.

Response message string:

“The license system cannot allocate the memory required.”
err_license_cannot_connect

Corresponding constant:

mosek.rescode.err_license_cannot_connect

Description:

MOSEK cannot connect to the license server. Most likely the license server is not up and running.

Response message string:

“MOSEK cannot connect to the license server.”
err_license_expired

Corresponding constant:

mosek.rescode.err_license_expired

Description:

The license has expired.

Response message string:

“The license has expired.”
err_license_feature

Corresponding constant:

mosek.rescode.err_license_feature

Description:

A requested feature is not available in the license file(s). Most likely due to an incorrect license system setup.

Response message string:

“The feature '%s' is not in license file. Consult the license manager error message.”
err_license_invalid_hostid

Corresponding constant:

mosek.rescode.er